Like most kayakers, you enjoy spending time on the water when the sun shines. However, it can be too hot to handle when the sun is out in full force! We’ve put together this blog post with 11 steps to creating your DIY sunshade for your kayak.
With just a few simple supplies and basic sewing skills, you can have a custom-made sun shade that keeps you cool and comfortable all day long. So what are you waiting for? Get started on your DIY sun shade today!
How to Make a DIY Kayak Sun Shade?
Steps to Follow:
If you love kayaking, but the sun is just too much sometimes, consider making your sun shade! It’s a great way to enjoy being out on the water while staying relaxed and comfortable.
Plus, it’s a relatively easy project you can complete in just a few hours. Here are the supplies you’ll need and the steps to follow:
- Supplies:
- Sturdy fabric (we recommend canvas or sunbrella)
- Scissors
- Measuring tape
- Sewing machine & thread
- Pole or dowel (for support)
Instructions:
First, measure the width of your kayak. You’ll need to cut two pieces of fabric, each twice the width of your kayak, plus an additional foot for seam allowance. For example, if your kayak is four feet wide, you’ll need to cut two pieces of fabric that are ten feet long.
Next, hem the long sides of both pieces of fabric. To do this, fold the fabric over by about an inch and a half, and sew it in place with a straight stitch.
Once the sides are hemmed, lay one piece of fabric upside down on a flat surface. Then, take the other piece of fabric and place it on top, right side up. Line up the raw (unhemmed) edges of the material and sew them together with a straight stitch, using a half-inch seam allowance.
Now it’s time to create the sleeve for the support pole. On one of the short ends of the fabric, fold over about two inches of fabric and sew it in place with a straight stitch. Then, insert the pole or dowel into the sleeve and ensure it’s a snug fit.
Finally, hem the other short end of the fabric. Once again, fold over about an inch and a half of the material and sew it in place with a straight stitch. And that’s it! Your DIY sun shade is now complete.
How to Make a DIY Sun Shade for a Boat?
Sure! Here is a step-by-step guide on how to make a DIY sun shade for your boat:
- Measure the area where you want to install the sun shade on your boat. You will need to know this area’s length and width to determine the shade’s size.
- Cut the PVC pipe to the desired length for the frame of the sun shade. You can use a PVC pipe cutter or a saw to do this.
- Assemble the frame by connecting the PVC pipes using PVC connectors. You can use PVC glue to secure the connections if desired.
- Cut the shade cloth to the desired size. It should be large enough to cover the frame and provide adequate shade.
- Attach the shade cloth to the frame using grommets and bungee cords. You can also use tie-down straps or other types of fasteners if desired.
- Install the sun shade on your boat by attaching it to the deck or other surface using bungee cords, tie-down straps, or other fasteners. Ensure the shade is secure and will not blow away in windy conditions.
- Enjoy your new DIY sun shade on your boat!
How to Make a DIY Sun Shade for Your Car?
Making a sun shade for your car is a bit more challenging than making one for a kayak or canoe, but it’s still possible to do it yourself with patience and the right supplies.
The first step is to measure the length and width of your car. You’ll need two pieces of fabric, each twice the length of your car, plus an additional foot for seam allowance. For example, if your car is 20 feet long, you’ll need to cut two pieces of fabric that are 40 feet long.
Next, hem the long sides of both pieces of fabric. To do this, fold the fabric over by about an inch and a half, and sew it in place with a straight stitch.
Once the sides are hemmed, lay one piece of fabric upside down on a flat surface. Then, take the other piece of fabric and place it on top, right side up. Line up the raw (unhemmed) edges of the fabric and sew them together with a straight stitch, using a half-inch seam allowance.
Now you’ll need to create two sleeves for the support poles. On each of the short ends of the fabric, fold over about two inches and sew it in place with a straight stitch. Then, insert the poles into the sleeves and ensure they fit snugly.
Finally, hem the other two short ends of the fabric. Once again, fold over about an inch and a half of fabric and sew it in place with a straight stitch. And that’s it! Your car sun shade is now complete!
FAQS:
Can you put a canopy on a kayak?
Yes, you can put a canopy on a kayak! We recommend using a sun shade for this purpose.
Can you make a sun shade for a car?
Yes, you can make a sun shade for a car! The process is similar to making a sun shade for a kayak or canoe.
Can you make a sun shade for a patio?
Yes, you can make a sun shade for a patio! The process is similar to making a sun shade for a kayak or canoe.
How do you pimp out a kayak?
You can pimp out a kayak by adding a sun shade, canopy, or other accessories. We recommend consulting with a kayak specialist to find the best accessories for your kayak.
What is the best material to make a boat cover out of?
There are a variety of materials you can use to make a boat cover, but we recommend using sun-resistant fabric. This will help protect your boat from the sun’s harmful rays.
What is the best material to use for a sun shade?
There are a variety of materials you can use for a sun shade, but we recommend using sun-resistant fabric. This will help protect you from the sun’s harmful rays.
Conclusion: Diy sun shade for kayak
We all know how bright the sun can be and how hard it can be to see on a sunny day. Luckily, making a DIY solar shade for boats, cars, and much more is not hard. With patience and the right supplies, you can shade your sun in no time! We hope this guide was helpful. If you have any questions, feel free to ask in the comments below.